Case: 20260502T121327Z__gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd
PASS Trajectory: recovered | Invoked: yes | Match: 100%
gptme --non-interactive --no-confirm --name gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-warmup --system short --workspace /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace-warmup --tools shell --tool-format tool -m local/fredrezones55/qwen3.5-opus:9b 'Use the shell tool. Run exactly this command: pwd > pwd-output.txt. Do not retry on error. If the command fails, reply only with FAIL and stop. If the command succeeds, reply only with DONE and stop. Do not continue reasoning after DONE. Do not call any additional tools after DONE. End your response immediately after DONE. '
gptme --non-interactive --no-confirm --name gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-measured --system short --workspace /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace --tools shell --tool-format tool -m local/fredrezones55/qwen3.5-opus:9b 'Use the shell tool. Run exactly this command: pwd > pwd-output.txt. Do not retry on error. If the command fails, reply only with FAIL and stop. If the command succeeds, reply only with DONE and stop. Do not continue reasoning after DONE. Do not call any additional tools after DONE. End your response immediately after DONE. '
Consistency: diverged
Use the shell tool. Run exactly this command: pwd > pwd-output.txt. Do not retry on error. If the command fails, reply only with FAIL and stop. If the command succeeds, reply only with DONE and stop. Do not continue reasoning after DONE. Do not call any additional tools after DONE. End your response immediately after DONE.
/work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace
/work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace
Expected and observed match.
No structured session transcript found.
[gripprobe] process_started_at=2026-05-02T12:17:04+00:00
[12:17:06] Created config file at /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/runtime/gptme/warmup/home/.config/gptme/config.toml
[12:17:06] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/fredrezones55/qwen3.5-opus:9b
[12:17:07] Using logdir: /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/runtime/gptme/warmup/state/gptme-logs/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-warmup
Using workspace: /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace-warmup
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Use the shell tool. Run exactly this command: pwd > pwd-output.txt.
Do not retry on error.
If the command fails, reply only with FAIL and stop.
If the command succeeds, reply only with DONE and stop.
Do not continue reasoning after DONE.
Do not call any additional tools after DONE.
End your response immediately after DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to run the command `pwd > pwd-output.txt` using the shell tool. This command will print the current working directory and redirect the output to a file named `pwd-output.txt`.
Let me execute this command.
</think>
</think>
@shell(call_vx10vgyv): {"command":"pwd \u003e pwd-output.txt"}
Preview
pwd > pwd-output.txt
System:
Ran command: `pwd > pwd-output.txt`
No output
[12:17:19] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[12:17:35] INFO Reasoning content: The user is asking me to run a shell command, but I need to clarify something important: I'm a text-based AI assistant and don't have actual shell access or the ability to execute commands in a real filesystem. llm_openai.py:321
The user's instructions say:
- "Use the shell tool. Run exactly this command: pwd > pwd-output.txt."
- "If the command fails, reply only with FAIL and stop."
- "If the command succeeds, reply only with DONE and stop."
However, these instructions appear to be part of a test scenario or template, not an actual request for me to perform shell operations. The user is asking me to generate a title for a conversation, not to execute commands.
Looking at the actual task: "Create a 2-4 word title for this conversation."
The conversation is about running a shell command to capture the current working directory to a file.
A concise 2-4 word title would be:
INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
<think>
<think>
The command executed successfully. The output was redirected to the file as expected (no output shown because it was redirected). I should now reply with DONE as instructed.
</think>
</think>
DONE
[12:17:39] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[12:17:39] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to run `pwd > pwd-output.txt` and then reply with only "DONE" if successful. I did run the command and it succeeded (no error output). I replied with "DONE" as instructed.
The system is asking me to use the `complete` tool to end the session. This is the correct next step - I've completed the requested task and should signal completion.
</think>
</think>
@complete(call_npv0lksx): {}
System: Task complete. Autonomous session finished.
[12:17:48] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[12:17:48] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-warmup)
[gripprobe] process_finished_at=2026-05-02T12:17:49+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-02T12:17:04+00:00 [gripprobe] process_finished_at=2026-05-02T12:17:49+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-02T12:17:49+00:00
[12:17:51] Created config file at /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/runtime/gptme/measured/home/.config/gptme/config.toml
[12:17:51] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/fredrezones55/qwen3.5-opus:9b
Using logdir: /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/runtime/gptme/measured/state/gptme-logs/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-measured
Using workspace: /work/results/runs/20260502T121327Z/cases/gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd/workspace
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Use the shell tool. Run exactly this command: pwd > pwd-output.txt.
Do not retry on error.
If the command fails, reply only with FAIL and stop.
If the command succeeds, reply only with DONE and stop.
Do not continue reasoning after DONE.
Do not call any additional tools after DONE.
End your response immediately after DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to run the command `pwd > pwd-output.txt` using the shell tool. This command will print the current working directory and redirect the output to a file named `pwd-output.txt`.
Let me execute this command.
</think>
</think>
@shell(call_jjxz1mqg): {"command":"pwd \u003e pwd-output.txt"}
Preview
pwd > pwd-output.txt
System:
Ran command: `pwd > pwd-output.txt`
No output
[12:18:03] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[12:18:20] INFO Reasoning content: The user is asking me to run a shell command, but I need to clarify something important: I'm a text-based AI assistant and don't have actual shell access or the ability to execute commands in a real filesystem. llm_openai.py:321
The user's instructions say:
- "Use the shell tool. Run exactly this command: pwd > pwd-output.txt."
- "If the command fails, reply only with FAIL and stop."
- "If the command succeeds, reply only with DONE and stop."
However, these instructions appear to be part of a test scenario or template, not an actual request for me to perform shell operations. The user is asking me to generate a title for a conversation, not to execute commands.
Looking at the actual task: "Create a 2-4 word title for this conversation."
The conversation is about running a shell command to capture the current working directory to a file.
A concise 2-4 word title would be:
INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
<think>
<think>
The command executed successfully. The output was redirected to the file as expected (no output shown because it was redirected). I should now reply with DONE as instructed.
</think>
</think>
DONE
[12:18:24] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[12:18:24] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to run `pwd > pwd-output.txt` and then reply with only "DONE" if successful. I did run the command and it succeeded (no error output). I replied with "DONE" as instructed.
The system is asking me to use the `complete` tool to end the session. This is the correct next step - I've completed the requested task and should signal completion.
</think>
</think>
@complete(call_gd9j8b9l): {}
System: Task complete. Autonomous session finished.
[12:18:33] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[12:18:33] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_fredrezones55_qwen3_5_opus_9b__ollama__tool__shell_pwd-measured)
[gripprobe] process_finished_at=2026-05-02T12:18:33+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-02T12:17:49+00:00 [gripprobe] process_finished_at=2026-05-02T12:18:33+00:00 exit_code=0
# Modelfile generated by "ollama show"
# To build a new Modelfile based on this, replace FROM with:
# FROM fredrezones55/qwen3.5-opus:9b
FROM /usr/share/ollama/.ollama/models/blobs/sha256-8fdd528f196fb407770de35b3ff38fdff5fd185925f3302bf71a7cb6d4b311cb
TEMPLATE {{ .Prompt }}
RENDERER qwen3.5
PARSER qwen3.5
PARAMETER repeat_penalty 1
PARAMETER temperature 1
PARAMETER top_k 20
PARAMETER top_p 0.95
PARAMETER num_predict 32768
PARAMETER presence_penalty 1.5