Case: 20260501T144517Z__gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de
PASS Trajectory: recovered | Invoked: yes | Match: 100%
gptme --non-interactive --no-confirm --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-warmup --system short --workspace /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/workspace-warmup --tools shell --tool-format tool -m local/aravhawk/qwen3.5-opus-4.6-text:9b 'Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE. '
gptme --non-interactive --no-confirm --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-measured --system short --workspace /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/workspace --tools shell --tool-format tool -m local/aravhawk/qwen3.5-opus-4.6-text:9b 'Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE. '
Consistency: diverged
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
2026-05-01
2026-05-01
Expected and observed match.
No structured session transcript found.
[gripprobe] process_started_at=2026-05-01T14:56:14+00:00
[14:56:16] Created config file at /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/runtime/gptme/warmup/home/.config/gptme/config.toml
[14:56:16] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/aravhawk/qwen3.5-opus-4.6-text:9b
Using logdir: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/runtime/gptme/warmup/state/gptme-logs/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-warmup
Using workspace: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/workspace-warmup
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt.
Wiederhole den Vorgang bei einem Fehler nicht.
Wenn der Befehl fehlschlaegt, antworte nur mit FAIL.
Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user is asking me to execute a specific shell command: `date +%F > date-output.txt`
This command will:
1. Use the `date` command with the `+%F` format option, which outputs the date in the format YYYY-MM-DD
2. Redirect the output to a file named `date-output.txt`
I need to use the shell tool to execute this command exactly as specified.
</think>
</think>
@shell(call_fgpqc98f): {"command":"date +%F \u003e date-output.txt"}
Preview
date +%F > date-output.txt
System:
Ran command: `date +%F > date-output.txt`
No output
[14:56:32] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[14:56:48] INFO Reasoning content: Let me analyze this conversation: llm_openai.py:321
1. The user is asking me to execute a specific shell command: `date +%F > date-output.txt`
2. This command outputs the current date in YYYY-MM-DD format to a file
3. The user wants me to repeat this process if there's an error
4. If the command fails, I should respond with "FAIL"
The main topic is clearly about executing a shell command and handling its output/error.
For a concise 2-4 word title, I need to capture the essence:
- Shell command execution
- Date output
- Error handling
"Shell command execution" - 3 words, captures the main action
"Date command output" - 3 words, focuses on the specific command
"Command execution task" - 3 words, generic but accurate
The most accurate and concise title would be "Shell command execution" as it directly describes what's happening in this conversation.
INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
<think>
<think>
The command executed successfully with no output, which is expected since the output was redirected to a file. Let me verify the file was created and contains the expected content.
</think>
</think>
@shell(call_vvkl305n): {"command":"cat date-output.txt"}
2026-05-01
System:
Ran allowlisted command: `cat date-output.txt`
`2026-05-01`
Assistant: Thinking...
Assistant:
<think>
<think>
The command executed successfully. The file `date-output.txt` was created and contains the date in the format YYYY-MM-DD (2026-05-01). The shell tool returned no errors, and the verification shows the expected output.
</think>
</think>
DONE
[14:57:01] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:57:01] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific shell command: `date +%F > date-output.txt`. They specified that:
1. If the command fails, I should only respond with "FAIL"
2. If the command succeeds, I should only respond with "DONE"
I executed the command and verified it worked by checking the output file. The file contains "2026-05-01" which is a valid date format. The command succeeded without errors.
According to the instructions, I should only respond with "DONE" for a successful command.
</think>
</think>
DONE
[14:57:12] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:57:12] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific shell command: `date +%F > date-output.txt`
I executed this command using the shell tool, and it succeeded. The command outputs the current date in YYYY-MM-DD format and redirects it to a file called date-output.txt.
I then verified the output by reading the file with `cat date-output.txt`, which showed `2026-05-01`.
The instructions were clear:
- If the command fails, respond only with FAIL
- If the command succeeds, respond only with DONE
Since the command succeeded, I responded with DONE.
The system is asking me if I want to finish the session. Since I've completed the requested task and the instructions were to only output DONE or FAIL, I should use the complete tool to end the session.
</think>
</think>
@complete(call_7qp3y85o): {}
System: Task complete. Autonomous session finished.
[14:57:28] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[14:57:28] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-warmup)
[gripprobe] process_finished_at=2026-05-01T14:57:28+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:56:14+00:00 [gripprobe] process_finished_at=2026-05-01T14:57:28+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:57:28+00:00
[14:57:29] Created config file at /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/runtime/gptme/measured/home/.config/gptme/config.toml
[14:57:30] WARNING Skipping all confirmation prompts. cli.py:265
[14:57:30] Using model: local/aravhawk/qwen3.5-opus-4.6-text:9b
Using logdir: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/runtime/gptme/measured/state/gptme-logs/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-measured
Using workspace: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de/workspace
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt.
Wiederhole den Vorgang bei einem Fehler nicht.
Wenn der Befehl fehlschlaegt, antworte nur mit FAIL.
Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user is asking me to execute a specific shell command: `date +%F > date-output.txt`
This command will:
1. Use the `date` command with the `+%F` format option, which outputs the date in the format YYYY-MM-DD
2. Redirect the output to a file named `date-output.txt`
I need to use the shell tool to execute this command exactly as specified.
</think>
</think>
@shell(call_ew0z7q2o): {"command":"date +%F \u003e date-output.txt"}
Preview
date +%F > date-output.txt
System:
Ran command: `date +%F > date-output.txt`
No output
[14:57:45] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[14:58:01] INFO Reasoning content: Let me analyze this conversation: llm_openai.py:321
1. The user is asking me to execute a specific shell command: `date +%F > date-output.txt`
2. This command outputs the current date in YYYY-MM-DD format to a file
3. The user wants me to repeat this process if there's an error
4. If the command fails, I should respond with "FAIL"
The main topic is clearly about executing a shell command and handling its output/error.
For a concise 2-4 word title, I need to capture the essence:
- Shell command execution
- Date output
- Error handling
"Shell command execution" - 3 words, captures the main action
"Date command output" - 3 words, focuses on the specific command
"Command execution task" - 3 words, generic but accurate
The most accurate and concise title would be "Shell command execution" as it directly describes what's happening in this conversation.
INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
<think>
<think>
The command executed successfully with no output, which is expected since the output was redirected to a file. Let me verify the file was created and contains the expected content.
</think>
</think>
@shell(call_thyxtvbx): {"command":"cat date-output.txt"}
2026-05-01
System:
Ran allowlisted command: `cat date-output.txt`
`2026-05-01`
Assistant: Thinking...
Assistant:
<think>
<think>
The command executed successfully. The file `date-output.txt` was created and contains the date in the format YYYY-MM-DD (2026-05-01). The shell tool returned no errors, and the verification shows the expected output.
</think>
</think>
DONE
[14:58:14] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:58:14] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific shell command: `date +%F > date-output.txt`. They specified that:
1. If the command fails, I should only respond with "FAIL"
2. If the command succeeds, I should only respond with "DONE"
I executed the command and verified it worked by checking the output file. The file contains "2026-05-01" which is a valid date format. The command succeeded without errors.
According to the instructions, I should only respond with "DONE" for a successful command.
</think>
</think>
DONE
[14:58:25] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:58:25] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific shell command: `date +%F > date-output.txt`
I executed this command using the shell tool, and it succeeded. The command outputs the current date in YYYY-MM-DD format and redirects it to a file called date-output.txt.
I then verified the output by reading the file with `cat date-output.txt`, which showed `2026-05-01`.
The instructions were clear:
- If the command fails, respond only with FAIL
- If the command succeeds, respond only with DONE
Since the command succeeded, I responded with DONE.
The system is asking me if I want to finish the session. Since I've completed the requested task and the instructions were to only output DONE or FAIL, I should use the complete tool to end the session.
</think>
</think>
@complete(call_yycgshl0): {}
System: Task complete. Autonomous session finished.
[14:58:41] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[14:58:41] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__shell_date_de-measured)
[gripprobe] process_finished_at=2026-05-01T14:58:41+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:57:28+00:00 [gripprobe] process_finished_at=2026-05-01T14:58:41+00:00 exit_code=0
# Modelfile generated by "ollama show"
# To build a new Modelfile based on this, replace FROM with:
# FROM aravhawk/qwen3.5-opus-4.6-text:9b
FROM /usr/share/ollama/.ollama/models/blobs/sha256-d0ecd80b0e45b0d9e49c8cd1527b7f7d52d8d3bde2c569ab36aac59bb78f53f7
TEMPLATE {{ .Prompt }}
RENDERER qwen3.5
PARSER qwen3.5
PARAMETER num_ctx 32768
PARAMETER presence_penalty 1.5
PARAMETER stop <|im_end|>
PARAMETER stop <|im_start|>
PARAMETER temperature 1
PARAMETER top_k 20
PARAMETER top_p 0.95