Case: 20260501T144517Z__gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru
PASS Trajectory: recovered | Invoked: yes | Match: 100%
gptme --non-interactive --no-confirm --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-warmup --system short --workspace /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/workspace-warmup --tools shell --tool-format tool -m local/aravhawk/qwen3.5-opus-4.6-text:9b 'Используй shell tool. Выполни ровно эту команду: python3 -c "from pathlib import Path; Path('"'"'python-output.txt'"'"').write_text('"'"'PYTHON_OK\\n'"'"')".
Не повторяй попытку при ошибке.
Если команда завершится ошибкой, ответь только FAIL.
Если команда завершится успешно, ответь только DONE.
'gptme --non-interactive --no-confirm --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-measured --system short --workspace /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/workspace --tools shell --tool-format tool -m local/aravhawk/qwen3.5-opus-4.6-text:9b 'Используй shell tool. Выполни ровно эту команду: python3 -c "from pathlib import Path; Path('"'"'python-output.txt'"'"').write_text('"'"'PYTHON_OK\\n'"'"')".
Не повторяй попытку при ошибке.
Если команда завершится ошибкой, ответь только FAIL.
Если команда завершится успешно, ответь только DONE.
'Consistency: diverged
Используй shell tool. Выполни ровно эту команду: python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\\n')".
Не повторяй попытку при ошибке.
Если команда завершится ошибкой, ответь только FAIL.
Если команда завершится успешно, ответь только DONE.
PYTHON_OK
PYTHON_OK
Expected and observed match.
No structured session transcript found.
[gripprobe] process_started_at=2026-05-01T14:52:43+00:00
[14:52:44] Created config file at /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/runtime/gptme/warmup/home/.config/gptme/config.toml
[14:52:44] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/aravhawk/qwen3.5-opus-4.6-text:9b
[14:52:45] Using logdir: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/runtime/gptme/warmup/state/gptme-logs/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-warmup
Using workspace: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/workspace-warmup
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Используй shell tool. Выполни ровно эту команду: python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\\n')".
Не повторяй попытку при ошибке.
Если команда завершится ошибкой, ответь только FAIL.
Если команда завершится успешно, ответь только DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific Python command using the shell tool. The command will create a file called 'python-output.txt' with the content 'PYTHON_OK[/dim]n'.
Let me execute this command exactly as specified.
</think>
</think>
@shell(call_2hzgnrl7): {"command":"python3 -c \"from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\\n')\""}
Preview
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\n')"
System:
Ran command: `python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\n')"`
No output
[14:52:58] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[14:53:06] INFO Reasoning content: Let me analyze this conversation to create an appropriate title. llm_openai.py:321
The conversation involves:
1. A user requesting execution of a specific Python command via shell
2. The command creates a file with specific content
3. The user wants to verify the output
Key elements:
- Shell command execution
- Python command
- File creation/verification
- Output checking
A concise 2-4 word title should capture the main topic.
INFO Auto-generated conversation name: Shell Python command execution chat.py:332
Assistant:
<think>
<think>
The command executed successfully without any output, which is expected since the Python code only writes to a file and doesn't print anything. The absence of error messages indicates success.
</think>
</think>
DONE
[14:53:10] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:53:10] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific Python command using the shell tool. The command was:
```
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK[/dim]n')"
```
This command:
1. Imports the Path class from pathlib
2. Creates a file named 'python-output.txt'
3. Writes the text 'PYTHON_OK[/dim]n' to that file
The shell tool executed the command and returned "No output" which is expected behavior - the command ran successfully without producing any output to stdout (it only wrote to a file).
Since the command completed without errors, I should respond with "DONE" as instructed.
</think>
</think>
DONE
[14:53:23] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:53:23] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific Python command using the shell tool. The command was:
```
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK[/dim]n')"
```
I executed this command and it completed successfully with no output (which is expected since the command writes to a file but doesn't print anything).
The user's instructions were clear:
- If the command fails, respond only with "FAIL"
- If the command succeeds, respond only with "DONE"
Since the command executed successfully, I responded with "DONE".
The system is now asking me if I want to finish the session. Looking at the conversation:
1. The user gave a specific command to execute
2. I executed it successfully
3. The user's instructions were to respond with "DONE" on success
The task is complete. I should use the `complete` tool to end the session as instructed.
</think>
</think>
The command executed successfully. The Python script created a file named `python-output.txt` with the content `PYTHON_OK\n`.
Since the task was to execute the command and report success/failure, and the command completed without errors, the response "DONE" was appropriate.
The session is now complete.
[14:53:45] INFO Autonomous mode: No tools used after 2 confirmations. Exiting. complete.py:134
INFO Hook 'complete.auto_reply' signaled session completion __init__.py:360
[14:53:45] Autonomous mode: No tools used after 2 auto-reply confirmations. Exiting.
Goodbye! (resume with: gptme --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-warmup)
[gripprobe] process_finished_at=2026-05-01T14:53:45+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:52:43+00:00 [gripprobe] process_finished_at=2026-05-01T14:53:45+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:53:45+00:00
[14:53:47] Created config file at /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/runtime/gptme/measured/home/.config/gptme/config.toml
[14:53:47] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/aravhawk/qwen3.5-opus-4.6-text:9b
Using logdir: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/runtime/gptme/measured/state/gptme-logs/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-measured
Using workspace: /work/results/runs/20260501T144517Z/cases/gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru/workspace
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Используй shell tool. Выполни ровно эту команду: python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\\n')".
Не повторяй попытку при ошибке.
Если команда завершится ошибкой, ответь только FAIL.
Если команда завершится успешно, ответь только DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific Python command using the shell tool. The command will create a file called 'python-output.txt' with the content 'PYTHON_OK[/dim]n'.
Let me execute this command exactly as specified.
</think>
</think>
@shell(call_5lmxtocf): {"command":"python3 -c \"from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\\n')\""}
Preview
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\n')"
System:
Ran command: `python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK\n')"`
No output
[14:54:00] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
Assistant:
<think>
<think>
The command executed successfully without any output, which is expected since the Python code only writes to a file and doesn't print anything. The absence of error messages indicates success.
</think>
</think>
DONE
[14:54:05] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:54:05] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
[14:54:13] INFO Reasoning content: Let me analyze this conversation to create an appropriate title. llm_openai.py:321
The conversation involves:
1. A user requesting execution of a specific Python command via shell
2. The command creates a file with specific content
3. The user wants to verify the output
Key elements:
- Shell command execution
- Python command
- File creation/verification
- Output checking
A concise 2-4 word title should capture the main topic.
INFO Auto-generated conversation name: Shell Python command execution chat.py:332
Assistant:
<think>
<think>
The user asked me to execute a specific Python command using the shell tool. The command was:
```
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK[/dim]n')"
```
This command:
1. Imports the Path class from pathlib
2. Creates a file named 'python-output.txt'
3. Writes the text 'PYTHON_OK[/dim]n' to that file
The shell tool executed the command and returned "No output" which is expected behavior - the command ran successfully without producing any output to stdout (it only wrote to a file).
Since the command completed without errors, I should respond with "DONE" as instructed.
</think>
</think>
DONE
[14:54:25] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[14:54:25] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user asked me to execute a specific Python command using the shell tool. The command was:
```
python3 -c "from pathlib import Path; Path('python-output.txt').write_text('PYTHON_OK[/dim]n')"
```
I executed this command and it completed successfully with no output (which is expected since the command writes to a file but doesn't print anything).
The user's instructions were clear:
- If the command fails, respond only with "FAIL"
- If the command succeeds, respond only with "DONE"
Since the command executed successfully, I responded with "DONE".
The system is now asking me if I want to finish the session. Looking at the conversation:
1. The user gave a specific command to execute
2. I executed it successfully
3. The user's instructions were to respond with "DONE" on success
The task is complete. I should use the `complete` tool to end the session as instructed.
</think>
</think>
The command executed successfully. The Python script created a file named `python-output.txt` with the content `PYTHON_OK\n`.
Since the task was to execute the command and report success/failure, and the command completed without errors, the response "DONE" was appropriate.
The session is now complete.
[14:54:48] INFO Autonomous mode: No tools used after 2 confirmations. Exiting. complete.py:134
INFO Hook 'complete.auto_reply' signaled session completion __init__.py:360
[14:54:48] Autonomous mode: No tools used after 2 auto-reply confirmations. Exiting.
Goodbye! (resume with: gptme --name gptme__local_aravhawk_qwen3_5_opus_4_6_text_9b__ollama__tool__python_file_ru-measured)
[gripprobe] process_finished_at=2026-05-01T14:54:48+00:00 exit_code=0
[gripprobe] process_started_at=2026-05-01T14:53:45+00:00 [gripprobe] process_finished_at=2026-05-01T14:54:48+00:00 exit_code=0
# Modelfile generated by "ollama show"
# To build a new Modelfile based on this, replace FROM with:
# FROM aravhawk/qwen3.5-opus-4.6-text:9b
FROM /usr/share/ollama/.ollama/models/blobs/sha256-d0ecd80b0e45b0d9e49c8cd1527b7f7d52d8d3bde2c569ab36aac59bb78f53f7
TEMPLATE {{ .Prompt }}
RENDERER qwen3.5
PARSER qwen3.5
PARAMETER num_ctx 32768
PARAMETER presence_penalty 1.5
PARAMETER stop <|im_end|>
PARAMETER stop <|im_start|>
PARAMETER temperature 1
PARAMETER top_k 20
PARAMETER top_p 0.95