Case: 20260423T183136Z__gptme__local_gemma4_e4b__ollama__tool__shell_file
PASS Trajectory: recovered | Invoked: yes | Match: 100%
gptme --non-interactive --no-confirm --name gptme__local_gemma4_e4b__ollama__tool__shell_file-warmup --system short --workspace /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/workspace-warmup --tools shell --tool-format tool -m local/gemma4:e4b 'Use the shell tool. Run exactly this command: printf '"'"'SHELL_OK\n'"'"' > shell-output.txt. Do not retry on error. If the command fails, reply only with FAIL. If the command succeeds, reply only with DONE. '
gptme --non-interactive --no-confirm --name gptme__local_gemma4_e4b__ollama__tool__shell_file-measured --system short --workspace /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/workspace --tools shell --tool-format tool -m local/gemma4:e4b 'Use the shell tool. Run exactly this command: printf '"'"'SHELL_OK\n'"'"' > shell-output.txt. Do not retry on error. If the command fails, reply only with FAIL. If the command succeeds, reply only with DONE. '
Consistency: diverged
Use the shell tool. Run exactly this command: printf 'SHELL_OK\n' > shell-output.txt. Do not retry on error. If the command fails, reply only with FAIL. If the command succeeds, reply only with DONE.
SHELL_OK
SHELL_OK
Expected and observed match.
No structured session transcript found.
[gripprobe] process_started_at=2026-04-23T18:38:57+00:00
[18:38:59] Created config file at /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/runtime/gptme/warmup/home/.config/gptme/config.toml
[18:38:59] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/gemma4:e4b
Using logdir: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/runtime/gptme/warmup/state/gptme-logs/gptme__local_gemma4_e4b__ollama__tool__shell_file-warmup
Using workspace: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/workspace-warmup
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Use the shell tool. Run exactly this command: printf 'SHELL_OK\n' > shell-output.txt.
Do not retry on error.
If the command fails, reply only with FAIL.
If the command succeeds, reply only with DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific shell command: `printf 'SHELL_OK[/dim]n' > shell-output.txt`.
I must use the `shell` tool.
The response format is strict:
1. If the command fails, reply only with `FAIL`.
2. If the command succeeds, reply only with `DONE`.
I will use the `shell` tool to run the command.
</think>
</think>
@shell(call_45hdcp4v): {"command":"printf 'SHELL_OK\\n' \u003e shell-output.txt"}
Preview
printf 'SHELL_OK\n' > shell-output.txt
System:
Ran command: `printf 'SHELL_OK\n' > shell-output.txt`
No output
[18:39:12] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[18:39:13] INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
DONE
[18:39:14] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[18:39:14] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user provided a system message indicating that no tool call was detected in the last message and suggesting I use the `complete` tool if I am finished.
In the previous turn, I successfully executed the requested shell command and then replied with "DONE" as instructed by the user's prompt ("If the command succeeds, reply only with DONE.").
Since the user's request was a single, self-contained task (run a command and report success/failure), and I have already completed that task and provided the required output ("DONE"), I should now signal the end of the session using the `complete` tool.
</think>
</think>
@complete(call_udc6gs2b): {}
System: Task complete. Autonomous session finished.
[18:39:23] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[18:39:23] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_gemma4_e4b__ollama__tool__shell_file-warmup)
[gripprobe] process_finished_at=2026-04-23T18:39:23+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:38:57+00:00 [gripprobe] process_finished_at=2026-04-23T18:39:23+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:39:23+00:00
[18:39:25] Created config file at /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/runtime/gptme/measured/home/.config/gptme/config.toml
[18:39:25] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/gemma4:e4b
[18:39:26] Using logdir: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/runtime/gptme/measured/state/gptme-logs/gptme__local_gemma4_e4b__ollama__tool__shell_file-measured
Using workspace: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_file/workspace
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Use the shell tool. Run exactly this command: printf 'SHELL_OK\n' > shell-output.txt.
Do not retry on error.
If the command fails, reply only with FAIL.
If the command succeeds, reply only with DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific shell command: `printf 'SHELL_OK[/dim]n' > shell-output.txt`.
I must use the `shell` tool.
The response format is strict:
1. If the command fails, reply only with `FAIL`.
2. If the command succeeds, reply only with `DONE`.
I will use the `shell` tool to run the command.
</think>
</think>
@shell(call_9keiawdh): {"command":"printf 'SHELL_OK\\n' \u003e shell-output.txt"}
Preview
printf 'SHELL_OK\n' > shell-output.txt
System:
Ran command: `printf 'SHELL_OK\n' > shell-output.txt`
No output
[18:39:38] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[18:39:39] INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
DONE
[18:39:40] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[18:39:40] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user provided a system message indicating that no tool call was detected in the last message and suggesting I use the `complete` tool if I am finished.
In the previous turn, I successfully executed the requested shell command and then replied with "DONE" as instructed by the user's prompt ("If the command succeeds, reply only with DONE.").
Since the user's request was a single, self-contained task (run a command and report success/failure), and I have already completed that task and provided the required output ("DONE"), I should now signal the end of the session using the `complete` tool.
</think>
</think>
@complete(call_021xr1ss): {}
System: Task complete. Autonomous session finished.
[18:39:49] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[18:39:49] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_gemma4_e4b__ollama__tool__shell_file-measured)
[gripprobe] process_finished_at=2026-04-23T18:39:49+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:39:23+00:00 [gripprobe] process_finished_at=2026-04-23T18:39:49+00:00 exit_code=0