Case: 20260423T183136Z__gptme__local_gemma4_e4b__ollama__tool__shell_date_de
PASS Trajectory: recovered | Invoked: yes | Match: 100%
gptme --non-interactive --no-confirm --name gptme__local_gemma4_e4b__ollama__tool__shell_date_de-warmup --system short --workspace /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/workspace-warmup --tools shell --tool-format tool -m local/gemma4:e4b 'Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE. '
gptme --non-interactive --no-confirm --name gptme__local_gemma4_e4b__ollama__tool__shell_date_de-measured --system short --workspace /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/workspace --tools shell --tool-format tool -m local/gemma4:e4b 'Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE. '
Consistency: diverged
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt. Wiederhole den Vorgang bei einem Fehler nicht. Wenn der Befehl fehlschlaegt, antworte nur mit FAIL. Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
2026-04-23
2026-04-23
Expected and observed match.
No structured session transcript found.
[gripprobe] process_started_at=2026-04-23T18:36:50+00:00
[18:36:52] Created config file at /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/runtime/gptme/warmup/home/.config/gptme/config.toml
[18:36:52] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/gemma4:e4b
Using logdir: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/runtime/gptme/warmup/state/gptme-logs/gptme__local_gemma4_e4b__ollama__tool__shell_date_de-warmup
Using workspace: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/workspace-warmup
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt.
Wiederhole den Vorgang bei einem Fehler nicht.
Wenn der Befehl fehlschlaegt, antworte nur mit FAIL.
Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific shell command: `date +%F > date-output.txt`.
I must use the `shell` tool.
The instructions specify strict output requirements:
1. If the command fails, I must respond *only* with "FAIL".
2. If the command succeeds, I must respond *only* with "DONE".
3. I must not repeat the process upon failure.
I will use the `shell` tool to execute the command.
</think>
</think>
@shell(call_7slqsei3): {"command":"date +%F \u003e date-output.txt"}
Preview
date +%F > date-output.txt
System:
Ran command: `date +%F > date-output.txt`
No output
[18:37:05] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[18:37:06] INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
DONE
[18:37:07] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[18:37:07] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user provided a system message indicating that no tool call was detected in the last message and suggesting I use `complete` if I am finished.
In the previous turn, I successfully executed the command `date +%F > date-output.txt` using the `shell` tool, and then I responded with "DONE" as instructed by the user's prompt ("If the command successful, antworte nur mit DONE.").
Since the task was to execute a single command and report the result according to specific rules, and I have already done so, the task is complete. I should now use the `complete` tool to signal the end of the session.
</think>
</think>
@complete(call_zelopsfw): {}
System: Task complete. Autonomous session finished.
[18:37:17] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[18:37:17] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_gemma4_e4b__ollama__tool__shell_date_de-warmup)
[gripprobe] process_finished_at=2026-04-23T18:37:17+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:36:50+00:00 [gripprobe] process_finished_at=2026-04-23T18:37:17+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:37:17+00:00
[18:37:19] Created config file at /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/runtime/gptme/measured/home/.config/gptme/config.toml
[18:37:19] WARNING Skipping all confirmation prompts. cli.py:265
Using model: local/gemma4:e4b
[18:37:20] Using logdir: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/runtime/gptme/measured/state/gptme-logs/gptme__local_gemma4_e4b__ollama__tool__shell_date_de-measured
Using workspace: /work/results/runs/20260423T183136Z/cases/gptme__local_gemma4_e4b__ollama__tool__shell_date_de/workspace
Skipped 2 hidden system messages, show with --show-hidden
--- ^^^ past messages ^^^ ---
User:
Verwende das Shell-Tool. Fuehre genau diesen Befehl aus: date +%F > date-output.txt.
Wiederhole den Vorgang bei einem Fehler nicht.
Wenn der Befehl fehlschlaegt, antworte nur mit FAIL.
Wenn der Befehl erfolgreich ist, antworte nur mit DONE.
Assistant: Thinking...
Assistant:
<think>
<think>
The user wants me to execute a specific shell command: `date +%F > date-output.txt`.
I must use the `shell` tool.
The instructions specify strict output requirements:
1. If the command fails, I must respond *only* with "FAIL".
2. If the command succeeds, I must respond *only* with "DONE".
3. I must not repeat the process upon failure.
I will use the `shell` tool to execute the command and then check the output to determine the final response.
</think>
</think>
@shell(call_zweycon5): {"command":"date +%F \u003e date-output.txt"}
Preview
date +%F > date-output.txt
System:
Ran command: `date +%F > date-output.txt`
No output
[18:37:33] ERROR exception during auto-name auto_naming.py:100
Traceback (most recent call last):
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/util/auto_naming.py", line 97, in _generate_llm_name
summary_model_name = get_summary_model(current_model.provider)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/venvs/gptme/lib/python3.12/site-packages/gptme/llm/models.py", line 576, in get_summary_model
raise ValueError(f"Provider {provider} did not have a summary model")
ValueError: Provider local did not have a summary model
Assistant: Thinking...
[18:37:34] INFO Auto-generated conversation name: Shell command execution chat.py:332
Assistant:
DONE
[18:37:35] INFO Auto-reply: Assistant message had no tools. Asking for confirmation... complete.py:138
[18:37:35] [Loop control] <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are comp...
User: <system>No tool call detected in last message. Did you mean to finish? If so, make sure you are completely done and then use the `complete` tool to end the session.</system>
Assistant: Thinking...
Assistant:
<think>
<think>
The user's last message was a system message indicating no tool call was detected and suggesting I use `complete` if I am finished.
In the previous turn, I successfully executed the command `date +%F > date-output.txt` using the `shell` tool, and the output was empty, which indicates success (no error output). Following the user's instructions for success, I responded with "DONE".
Since the task was a single, self-contained execution and reporting, and I have already provided the required output ("DONE"), I believe the task is complete. I should now use the `complete` tool to signal the end of the session.
</think>
</think>
@complete(call_rhr3vuhw): {}
System: Task complete. Autonomous session finished.
[18:37:45] INFO Complete tool call detected, stopping session immediately complete.py:80
INFO Hook 'complete.complete' signaled session completion __init__.py:360
[18:37:45] Autonomous mode: Session completed via complete tool. Exiting.
Goodbye! (resume with: gptme --name gptme__local_gemma4_e4b__ollama__tool__shell_date_de-measured)
[gripprobe] process_finished_at=2026-04-23T18:37:45+00:00 exit_code=0
[gripprobe] process_started_at=2026-04-23T18:37:17+00:00 [gripprobe] process_finished_at=2026-04-23T18:37:45+00:00 exit_code=0